Fonts

TinyFont

TinyFont is a 4x4 font which conforms to small ASCII from 32-127.

It stores 4 letters in 8 bytes and uses masks to draw the correct letter which makes the sprites 224 bytes in size.

Additional details can be found here and the repo here

A sample program is shown below:

#include <Arduboy2.h>
#include "Tinyfont.h"

Arduboy2 arduboy;
Tinyfont tinyfont = Tinyfont(arduboy.sBuffer, Arduboy2::width(), Arduboy2::height());

void setup() {

  arduboy.begin();

}

void loop() {

  arduboy.clear();

  tinyfont.setCursor(1, 0);
  tinyfont.print("THE QUICK BROWN FOX JUMPS\nOVER THE LAZY DOG.");
  tinyfont.setCursor(1, 11);
  tinyfont.print("The quick brown fox jumps\nover the lazy dog.");

  arduboy.display();
}

Font3x5

Font3x5 is a simple library that provides a 3 x 5 pixel font which has the upper- and lower-case alphabet, numbers and the exclamation mark and the period. You can easily add extra characters if you like.

There is a #define that allows you to remove the lower case letters. Doing so strips out 108 bytes. Additional details can be found here and the repo here

A sample program is shown below:

#include <Arduboy2.h>
#include "src/fonts/Font3x5.h"

Arduboy2Base arduboy;
Font3x5 font3x5 = Font3x5();

void setup() {

   arduboy.boot();

}

void loop() {

    if (!(arduboy.nextFrame())) return;

    arduboy.clear();
    font3x5.setCursor(12, 12);
    font3x5.print(F("ABCDEFGHIJKLMNOPQRSTUVWXYZ"));
    font3x5.print(F("\nabcdefghijklmnopqrstuvwxyz"));
    font3x5.print(F("\n0123456789"));
    font3x5.print(F("\n!."));

    arduboy.display();

}

You can also pass a line height to the constructor, as shown below:

Font3x5 font3x5 = Font3x5( 11 );

The two images below show the standard line height - 8 - and 11.

Font4x6

Font4x6 is a simple library that provides a 4 x 6 pixel font which has the upper- and lower-case alphabet, numbers and the exclamation mark and the period. You can easily add extra characters if you like.

There is a #define that allows you to remove the lower case letters. Doing so strips out 108 bytes. Additional details can be found here and the repo here

A sample program is shown below:

#include <Arduboy2.h>
#include "src/fonts/Font4x6.h"

Arduboy2Base arduboy;
Font4x6 font4x6 = Font4x6();

void setup() {

    arduboy.boot();

}

void loop() {

    if (!(arduboy.nextFrame())) return;

    arduboy.clear();
    font4x6.setCursor(12, 12);
    font4x6.print(F("ABCDEFGHIJKLMNOPQRSTUVWXYZ"));
    font4x6.print(F("\nabcdefghijklmnopqrstuvwxyz"));
    font4x6.print(F("\n0123456789"));
    font4x6.print(F("\n!."));

    arduboy.display();

}

You can also pass a line height to the constructor, as shown below:

Font4x6 font4x6 = Font4x6( 11 );